The cap bottle has many features, such as several available color options, a wide range of sizes with existing shape, and FDA food grade plastic material. It also has application, such as capsules, pills, tablets etc.

The key to the sealing of cap bottles is the boss design. There are two ideas for mechanical seal design: increase the contact surface and extend the medium leakage path. Theoretically, complete sealing is impossible, what we pursue is only to minimize leakage within certain conditions.

13oz 20oz 32oz Plastic HDPE Silver Chromed Bottle PackagingUS WarehouseDirect DeliveryThe chrome plating technology has been widely used on cosmetic industry for many year, so plating on small cosmetic parts like on PP, PMMA, PC, etc; has been very common. When we start to apply this plating tec

More popular high-end products in the market-Soft Touch Bottle

HDPE Bottle has good chemical stability. It is insoluble in any organic solvent at room temperature, resistant to corrosion by acid, alkali and various salts. At the same time, HDPE Bottle has low permeability to water vapor and air and low water absorption.

Most HDPE bottles are made of PE, a resin material obtained by polymerizing ethylene. PE has no smell and feels a bit like wax. It can be stored at low temperature for a long time (the temperature is between minus 100 and minus 70° Celsius), and it is very stable and can not be corroded by some things with strong acid and alkali.. If it has normal temperature, it will not be mixed with ordinary solvents, and it will not absorb much water and conduct no electricity. For more about HDPE bottles, please read the following words.

HDPE bottle is a high density polyethylene plastic product that deforms in a high temperature environment, and the bottles of detergent or shampoo that we usually use in life are actually made of this material.

The HDPE bottle has a uniform color and gloss without obvious color differences in bright natural light. The surface of the HDPE bottle should be smooth and flat, without deformation and obvious scratches. There must be no sand holes, oil stains and air bubbles. The mouth of the bottle should be flat and smooth.

HDPE Bottle is a plastic bottle for oral solids produced by injection blow molding with high density polyethylene (HDPE) as the main raw material.